It appears you do not have Javascript enabled in your browser. Javascript must be enabled for our website to display and function properly.
$7.99 or $13.99 Flat Rate Shipping! Restrictions Apply - Click for Details.

Drip Tape Sleeve End

Quick and Inexpensive Means to End Drip Tape

Item Number: IRC441


In Stock! Ships from Northern CA.


In Stock! Ships from Northern CA.

Buy Big, Save Big! As low as $0.19 each!
  • Buy 10 for $0.23 each and save 8%
  • Buy 50 for $0.20 each and save 20%
  • Buy 100 for $0.19 each and save 24%


If you run out of capped ends or want to run temporary lines, use these inexpensive alternative to close off your drip tape lines.

Simply slip the end of the tape through the narrow end of the fitting allowing about 3 inches to extend beyond sleeve. Fold the end over 2 to 3 times. Tuck the folded end back into the wider opening of the fitting.


  • Use with Drip Tape


Emitter Style Drip Type of Pressure Regulator Needed 10 psi pressure regulator
Emitter Style Drip
Type of Pressure Regulator Needed 10 psi pressure regulator

What You May Need

Shipping Information

Shipping Weight: 0.05 lbs. Dimensions: 1.5"L x 1.5"W x 1.5"H


Why bother?

Tie a knot in the end of the tape.

Reviewed by on

leaky, but...

As another reviewer noted, these leak. Sometimes a lot. If this is a problem, put a drop of Gorilla glue inside the tube just before you fold it up. Be sure to allow a few hours curing time before pressurizing the system. It works!

Reviewed by on

Not a complete seal

Its stops a large flow of water but you still end up with a large puddle around it after watering.

Reviewed by on

Write Your Own Review

Write "HUMAN" in the field below.