Ideal attachment points for PVC when building pipe structures like greenhouses, cold frames & shade covers. UV stabilized, they fit onto regular PVC water pipe.
This fitting is designed to fit OVER 1” PVC pipe. The physical dimensions of the hole in the fitting accommodates the full outer diameter of the PVC pipe. Thus, when buying fittings, buy 1” fittings for 1” PVC.
- Dimensions: 2.875"L x 2.875"W x 2.875"H
Additional 4-way fittings are available and both work wonders for peak, corners and multi-level structures! They provide more possibilities for building structures from PVC! The 5 way fitting is shaped like a cross with a fifth outlet in the center. Use these for center supports when covering berry patches or for the center support pole of pastured animal pens.
Also check out our Adjustable Ell fittings, (2-way, 3-way, and 4-way) that you can set to any angle you want just by loosening and tightening a screw.
The Slip-T fitting is shaped like a regular Tee, but the pipe can slip all the way through the 2 adjoining outlets, allowing the pipe to go into the T one way and out the other. Then the third outlet just snaps into place. Use this Slip T for making hinges or to add support to a structure without having to cut the pipe.