Build your own greenhouse, cold frame, shade cover or anything else you can think of with these PVC fittings and some PVC water pipe!
Snap fittings require no gluing, just snap pipe into place. UV stabilized, they fit onto regular PVC water pipe.
Regular elbow and T fittings are great for your 90% angles, but 3 way, 4 way and 5 way fittings work wonders for peaks, corners and multi-level structures.
This fitting is designed to fit OVER 1/2” PVC pipe. The physical dimensions of the hole in the slip fitting accommodates the full outer diameter of the PVC pipe. Thus, when buying fittings, buy 1/2” fittings for 1/2” PVC.
Also check out our Adjustable Ell fittings, (2-way, 3-way, and 4-way) that you can set to any angle you want just by loosening and tightening a screw.
Let your imagination run wild!
The Slip-T fitting is shaped like a regular Tee, but the pipe can slip all the way through the 2 adjoining outlets, allowing the pipe to go into the T one way and out the other. Then the third outlet just snaps into place. Use this Slip T for making hinges or to add support to a structure without having to cut the pipe.