Drip Tape Loc Sleeve End With Cap

The fitting you need to end your Drip Tape run. Screw off cap to flush line when desired. Barbed ends insert into drip tape and secures in place by twisting the lock over the end of the tape.

Drip Tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip Tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.

⚠ Warning: This product or its packaging has a CA Prop 65 Warning