Item Number: IRC450
Drip Tape Loc Sleeve 1/4" Barbed Fitting
Drip Tape Loc Sleeve 1/4" Barbed Fitting
Use to Attach Drip Tape to a Supply Line
¼ inch drip fittings for drip irrigation. The fitting you need to take drip tape runs off 1/2" poly tubing at a 90 degree angle. Loc Sleeve end inserts into drip tape and is secured by twisting the lock over the end of the tape. The small barbed end punches into the side of the poly tubing.
Drip tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.
⚠ Warning: This product or its packaging has a CA Prop 65 Warning
Check Your Zone Compatibility:
Our Guarantee To You
Since 1976, we've served our customers at every stage of growing. Please contact us at any time. We are happy to support and assist you.
Description
Description
¼ inch drip fittings for drip irrigation. The fitting you need to take drip tape runs off 1/2" poly tubing at a 90 degree angle. Loc Sleeve end inserts into drip tape and is secured by twisting the lock over the end of the tape. The small barbed end punches into the side of the poly tubing.
Drip tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.
⚠ Warning: This product or its packaging has a CA Prop 65 Warning
Shipping Information
Shipping Information
Shipping Weight: 0.03 lb
Dimensions: 2.25"L x 1.375"W x 1.0"H
Features
Features
- Use with Drip Tape
Characteristics
Characteristics
Use Instructions
Use Instructions
Useful Information
Useful Information
Guarantee
Guarantee
Customer Reviews
