Power-Loc - 1/2" End with Flush Valve

Clear Lines without Twisting Caps

Item Number: IRC740


In Stock! Ships from Northern CA.


In Stock! Ships from Northern CA.

Buy Big, Save Big! As low as $2.62 each!
  • Buy 10 for $3.14 each and save 11%
  • Buy 50 for $2.79 each and save 21%
  • Buy 100 for $2.62 each and save 25%


End your 1/2" poly tubing distribution system with this flush valve. Other fittings are available to end your lines, but none as simple as turning this ball valve to release remaining fluid.

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

  • Can be used with pressure up to 60 psi
  • Compatible with pressure compensating emitterline


Type of Poly Tubing to Use Use with 1/2" Poly Tubing
Type of Poly Tubing to Use Use with 1/2" Poly Tubing

Videos & Articles


What You May Need

Shipping Information

Shipping Weight: 0.10 lbs. Dimensions: 3.125"L x 1.625"W x 1.125"H


End with Flush Valve

This was my first season to try an irrigation system. The Power Loc parts were SO easy to use and super reliable. This part was handy to have when we took the tubing out for the winter. We were able to fully drain all the water before storing it.

Reviewed by on

Write Your Own Review

Write "HUMAN" in the field below.