Power-Loc - 1/2" End With Screw Cap

Screw Cap Finish For Water System

Item Number: IRC725


In Stock! Ships from Northern CA.


In Stock! Ships from Northern CA.

Buy Big, Save Big! As low as $1.27 each!
  • Buy 10 for $1.52 each and save 11%
  • Buy 50 for $1.35 each and save 21%
  • Buy 100 for $1.27 each and save 25%


End your 1/2" poly tubing distribution system with this easy to open twist cap. Flush out remaining fluids by removing the cap or extend the line by exchanging the fitting with a coupler, elbow or tee.

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

  • Can be used with pressure up to 60 psi
  • Compatible with pressure compensating emitterline


  • Replacement Parts Available


Type of Poly Tubing to Use Use with 1/2" Poly Tubing
Type of Poly Tubing to Use Use with 1/2" Poly Tubing

What You May Need

Shipping Information

Shipping Weight: 0.10 lbs. Dimensions: 3.5"L x 1.375"W x 1.375"H


Power Loc

This was my first season to try an irrigation system. The Power Loc parts were SO easy to use and super reliable. I expect they'll last several seasons.

Reviewed by on

Write Your Own Review

Write "HUMAN" in the field below.