Drip Tape Loc Sleeve 1/2" Barbed Fitting

Drip Meets Its Poly Tubing Match

Item Number: IRC470

$0.79

In Stock! Ships from Northern CA.

$0.79

In Stock! Ships from Northern CA.

Buy Big, Save Big! As low as $0.59 each!
  • Buy 10 for $0.71 each
  • Buy 50 for $0.63 each
  • Buy 100 for $0.59 each

Description

The fitting you need to take drip tape runs off 1/2" poly tubing. Screw down end inserts into drip tape and is locked in place by twisting the lock over the end of the tape. The opposite side is inserted into the poly tubing and held in place by the barbed end.

Drip tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.

Features

  • Use with Drip Tape

Characteristics

Type of Poly Tubing to Use Use with 1/2" Poly Tubing Emitter Style Drip
Type of Pressure Regulator Needed 10 psi pressure regulator
Type of Poly Tubing to Use Use with 1/2" Poly Tubing
Emitter Style Drip
Type of Pressure Regulator Needed 10 psi pressure regulator

What You May Need

Shipping Information

Shipping Weight: 0.03 lbs. Dimensions: 2.75"L x 1.125"W x 1.125"H

Reviews

Write Your Own Review

The information provided in this box will NOT be published in your review.

By submitting your review for entry into our contest, you agree to the following: Each product review submitted will enter you into our monthly drawing for a $100 gift card, provided you chose to enter the drawing. Multiple reviews on the same product will count as one entry. One winner will be chosen at random every month. The winner will be contacted via phone and/or email. If we are unable to make contact with the winner within 30 days of the drawing date, that winner will forfeit their prize. We reserve the right to end this contest at any time, for any reason.

Write "HUMAN" in the field below.

Cancel