1/4" Barbed Elbow

Use these couplers to extend water feeds off 1/4" poly tubing for emitters and sprayers in beds, containers and planters. The elbow fitting allows designing with 90 degree angles directly into the side of 1/2" poly tubing or with both ends accommodating 1/4" poly.

Avoid using several emitters along the same line of tubing as water flow at the end of each emitter will be reduced below stated output. Using separate branches off 1/2" poly to emitters is more consistent.

Shop compatible emitterline and fittings, and use our drip irrigation resources for planning and installation help.

Use and care: Match the 1/4" Barbed Elbow to the connection size, working pressure, and intended watering pattern before assembly. Start the water slowly, inspect all joints, and adjust flow according to soil texture, weather, and plant needs. Drain exposed equipment before freezing weather and store removable parts out of direct sun when the system is not in use.

Visit our drip irrigation resources for planning and maintenance guidance.