Direct Loc 1/2" 4 Way Connector

Four-way connector to use with 1/2" poly tubing.

• Easy to install and remove tubing for reconfiguring or storing away in the winter
• Use with 1/2" poly tubing (fits both 1/2" 0.700 OD and 1/2" 0.710 OD tubing)
• Maximum operating pressure is 70 psi

Shop compatible emitterline and fittings, and use our drip irrigation resources for planning and installation help.

California Proposition 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm; for more information, visit www.P65Warnings.ca.gov.

Connection guidance: Confirm the thread, tubing, or hose size on both sides of the Direct Loc 1/2" 4 Way Connector before installation. Cut flexible tubing square where applicable, seat each connection fully, and use only the sealing method recommended for that fitting style. Start water slowly, check for movement or seepage, and retighten by hand as appropriate; excessive force can damage plastic threads or washers. Flush new or repaired lines before attaching small emitters.

Shop compatible poly tubing fittings and review our irrigation guides.