Power-Loc - 1/2" Elbow

This coupler allows you to customize your water distribution system to accommodate corners.Bending the 1/2" poly tubing to fit a corner would shut off the water supply. An elbow fitting provides continuous, leak free transition around a 90 degree angle.

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

• Can be used with pressure up to 60 psi
• Compatible with pressure compensating emitterline

Shop compatible emitterline and fittings, and use our drip irrigation resources for planning and installation help.

California Proposition 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm; for more information, visit www.P65Warnings.ca.gov.