
- Description
- Features
- Characteristics
- Use Instructions
- Useful Information
- Shipping Information
- Guarantee
Description
Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. Allows a 90 degree angle off the spigot rather than the straight connection offered by the standard female starter fitting (IRC730).
Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.
- Can be used with pressure up to 60 psi
- Compatible with pressure compensating emitterline
Warning: This product or its packaging contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov.
Features
- Hose Thread
Characteristics
Useful Information
Shipping
Shipping Weight: 0.1 lb
Dimensions: 4"L x 2.25"W x 1.25"H