- Use Instructions
- Useful Information
- Shipping Information
Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. Allows two 90 degree angles off the spigot rather than the straight connection offered by the standard female starter fitting (IRC730).
Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.
- Can be used with pressure up to 60 psi
- Compatible with pressure compensating emitterline
- Hose Thread
Shipping Weight: 0.15 lb
Dimensions: 5.375"L x 2.25"W x 1.25"H