- Use Instructions
- Useful Information
- Shipping Information
Join poly tubing or emitterlines into a three-way configuration. This coupler allows you to customize your water distribution system for corners or begin new runs at 90 degree angles.
Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.
- Can be used with pressure up to 60 psi
- Compatible with pressure compensating emitterline
- Use for circular runs of emitterline off polytubing
Warning: This product or its packaging contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information see www.p65warnings.ca.gov.
Shipping Weight: 0.15 lb
Dimensions: 5.375"L x 3.375"W x 1.25"H