Item Number: IRC730
Power-Loc - 3/4" Female Hose Starter Fitting
Power-Loc - 3/4" Female Hose Starter Fitting
Start Your Water Distribution Off Your Spigot
Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. (For female hose thread connection, see IRC745.)
Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.
- Can be used with pressure up to 60 psi
- Compatible with pressure compensating emitterline
⚠ Warning: This product or its packaging has a CA Prop 65 Warning
Check Your Zone Compatibility:
Compatible with your zone.
Growing Zone for
Our Guarantee To You
Since 1976, we've served our customers at every stage of growing. Please contact us at any time. We are happy to support and assist you.
Description
Description
Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. (For female hose thread connection, see IRC745.)
Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.
- Can be used with pressure up to 60 psi
- Compatible with pressure compensating emitterline
⚠ Warning: This product or its packaging has a CA Prop 65 Warning
Shipping Information
Shipping Information
Shipping Weight: 0.1 lb
Dimensions: 3.25"L x 1.25"W x 1.25"H
Features
Features
- Hose Thread
Characteristics
Characteristics
Use Instructions
Use Instructions
Useful Information
Useful Information
Guarantee
Guarantee
Share
This Power Loc starter has never leaked and remains securely in place.
One time, I ran out of this part when expanding my irrigation and I had to buy a different brand at a local shop nearby. The competing brand leaks no matter what you do to fit it on the spigot. I returned them and bought more of these Power Locs.
Easy to use no fighting to put on the poly tubing.
I have to admit I felt pretty dumb after struggling to get this on the emitterline I bought with it. Turns out there are two ways to conceptually install this.
1) You unthread the nut off the PowerLoc and on to the Emitterline, then press on the Emitter line to the barb end of the PowerLoc and attempt to thread the nut again. THIS IS WRONG.
2) Tighten the nut all the way down to the base of the PowerLoc, as if you were tightening it. Then press on the Emitterline and "unthread" the nut towards the Emitterline, it will cinch tight and the Emitterline isn't going to budge.
Wanted to share in the hopes this helps someone
Essential irrigation part. Be sure to plan out your system because it is easy to forget these small parts!
these power-loc fittings are easy to work with and tight fitting. Far better than those compression fittings. A little more money, but well worth it.
We clean up after ourselves.
Ecommerce deliveries have a carbon footprint. That's why we support verified projects that remove carbon from the air.
Every delivery’s carbon footprint is calculated based on weight, shipping method, and distance traveled. We neutralize these emissions by purchasing verified carbon removal credits from groundbreaking projects.
With your purchase, you’ll join a community of proactive merchants and customers dedicated to a sustainable future. Together, we've removed emissions for over 46 million deliveries and removed over 32 thousand tonnes of carbon.
We work with a network of pioneering carbon removal companies that have been vetted by the commerce platform Shopify.