Single Piece Jet Sprinkler - 90 Green

Jet sprayers are used for ground covers and areas that need full water coverage. A small deflection cap creates a specific fan spray pattern that thoroughly saturates the area at a lower pressure than conventional sprinklers.

Connect the Jet to the end of the 1/4" tubing held by irrigation stakes, or at the end of a riser tube installed on the Irrigation Stake. Sprayers on riser tubes may also be connected directly into 1/2" poly tubing with a 1/4" threaded barb.

• 90 degree directional spray pattern
• Spray diameter: 7feet
• Optimum pressure: 10 psi
• GPH: 4.4

Shop compatible drip sprinklers and sprayers, and use our drip irrigation resources for planning and installation help.

Layout guidance: Use the Single Piece Jet Sprinkler - 90 Green where a quarter-circle pattern matches the planting area, then verify spacing under actual pressure and wind conditions. Install it with the compatible tubing, barb, stake, or riser shown for the system. Flush the line before final connection and inspect the outlet periodically for mineral or sediment buildup. Adjust run time to soil texture, crop needs, weather, and observed infiltration rather than relying on a universal schedule.

See our drip irrigation resources for zone planning and maintenance.