PVC Fitting - Slip T (1/2")

Ideal attachment points for PVC when building pipe structures like greenhouses, cold frames & shade covers. UV stabilized, they fit onto regular PVC water pipe. The Slip T fitting is shaped like a regular Tee, but the pipe can slip all the way through the 2 adjoining outlets, allowing the pipe to go into the T one way and out the other. Use this Slip T for making hinges or to add support to a structure without having to cut the pipe.

This fitting is designed to fit OVER 1/2” PVC pipe. The physical dimensions of the hole in the slip fitting accommodates the full outer diameter of the PVC pipe. Thus, when buying fittings, buy 1/2” fittings for 1/2” PVC.

• Dimensions: 2"L x 1.25"W x 1"H

Additional 3-way and 4-way fittings are available and work wonders for peak, corners and multi-level structures! They provide more possibilities for building structures from PVC! The 5 way fitting is shaped like a cross with a fifth outlet in the center. Use these for center supports when covering berry patches or for the center support pole of pastured animal pens.

California Proposition 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm; for more information, visit www.P65Warnings.ca.gov.