Soaker Hose 1/2" Barbed End With Cap

Ends Green Stripe soaker hose in designs where it does not wrap back onto a tee fitting in a circular pattern.

Fits the larger diameter, green striped professional grade Mr. Soaker that seeps water the entire length of the hose.

• Allows flushing the line by opening cap.
• Maximum run per length of soaker hose is 250 feet with a maximum of 500 feet per spigot.
• Soaker hose should be on flat surface not exceeding 2 foot rise over 100 feet.

Shop compatible soaker hose and fittings, and use our drip irrigation resources for planning and installation help.

Connection guidance: Confirm the thread, tubing, or hose size on both sides of the Soaker Hose 1/2" Barbed End With Cap before installation. Cut flexible tubing square where applicable, seat each connection fully, and use only the sealing method recommended for that fitting style. Start water slowly, check for movement or seepage, and retighten by hand as appropriate; excessive force can damage plastic threads or washers. Flush new or repaired lines before attaching small emitters.

Shop compatible poly tubing fittings and review our irrigation guides.