Power-Loc - 1/2" End with Flush Valve

End your 1/2" poly tubing distribution system with this flush valve. Other fittings are available to end your lines, but none as simple as turning this ball valve to release remaining fluid.

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

• Can be used with pressure up to 60 psi
• Compatible with pressure compensating emitterline

Shop compatible emitterline and fittings, and use our drip irrigation resources for planning and installation help.

California Proposition 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm; for more information, visit www.P65Warnings.ca.gov.