- Use Instructions
- Useful Information
- Shipping Information
The fitting you need to connect two segments of drip tape. Very useful for repairing runs rather than replacing entire segment. Barbed ends insert into drip tape and secures in place by twisting the lock over the end of the tape.
Drip tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.
⚠ Warning: This product or its packaging has a CA Prop 65 Warning
- Use with Drip Tape
Shipping Weight: 0.05 lb
Dimensions: 3.25"L x 1.0"W x 1.0"H